VPN Process  

1. Open the device 'Settings' app and select the VPN tab
   • Tap on 'VA Derived Connection' but do not toggle on yet

   • 

2. Launch the 'Cisco AnyConnect' app and activate the VPN toggle here
   • 'VA Derived Connection' will be pre-selected from the first step
   • 

Note: connecting to the VPN requires GFE Remote Access. 

VPN Setup

1. Find and launch the pre-installed VA 'Hub' app 
   • Allow the app to sync if needed
2. Select the 'Apps' category at the bottom or use the search bar at the top
3. Search for "Cisco" and select the white app icon

   • 

4. Tap the 'Install' button and wait a few minutes
5. Check your device homescreen for the installed app